JOYOR ELECTRIC SCOOTERS
- LCD display
- Lever lock for handlebar height adjustment
- Handlebar folding sleeve
- Brake wire
- Front suspension
- Front light
- Front mudguard
- Folding system
- Rear light
- Parking stand
- Brake handle
- Front air tyre
- Rear solid tyre
- Rear mudguard
- Rear drum brake
.2 Joyor X-Serie
Joyor Electric Scooter X-Series
- LCD display
- Lever lock for handlebar height adjustment
- Handlebar folding sleeve
- Brake wire
- Front suspension
- Front light
- Front mudguard
- Folding system
- Rear light
- Parking stand
- Brake handle
- Front air tyre
- Rear air tyre
- Rear mudguard
- Rear disk brake
.3 Joyor Y-Serie
Joyor Electric Scooter Y-Series
- LCD display
- Lever lock for handlebar height adjustment
- Handlebar folding sleeve
- Brake wire
- Double front suspension
- Front light
- Front mudguard
- Folding system
- Rear light
- Parking stand
- Brake handle
- Front air tyre
- Rear air tyre
- Double rear suspension
- Rear mudguard
- Front turning signal
- Rear turning signal
- Front and rear disk brake
.4 Joyor G-Serie
Joyor Electric Scooter G-Series
- LCD display
- Lever lock for handlebar height adjustment
- Handlebar folding sleeve
- Brake wire
- Double front suspension
- Front mudguard
- Folding system
- Rear light
- Parking stand
- Brake handle
- Solid front tyre
- Rear solid tyre
- Double rear suspension
- Rear mudguard
- Front disk brake
- Rear drum brake
.5 Joyor S-Serie
Joyor Electric Scooter S-Serie
- LCD display
- Lever lock for handlebar height adjustment
- Handlebar sleeve
- Brake wire
- Brake handle
- Front suspension
- Front light
- Front mudguard
- Front air tyre
- Front disc brake (hydraulic on S10-S)
- Front motor (only S10-S)
- Folding system
- Rear light
- Side lights
- Parking stand
- Rear motor
- Rear air tyre
- Rear mudguard
- Rear disk brake (hydraulic on S10-S)
- Rear suspension
.1 Vibrations
— The vibration value exposed to the hand-arm system is 2.5 m/s2.
— Measurement uncertainty, 0.5 m/s2. The vibration can be altered due to the rough terrain where the scooter is circulated. However, this alteration will not depend on the scooter.
.2 Airborne Noise
The A-weighted emission sound pressure level is 35 db (A)
.3 Command Systems
— The electric scooter does not have the possibility of remote control. It is not necessary to use any additional means to prevent unauthorised use for safety measures because this machine is not considered a dangerous industrial machine but a vehicle for individual transport for public use.
— From the driver’s position, the driver can operate all the drive components necessary for the operation of the machine: brake, display with accelerator, handlebar, light switch, bell.
— The displacement of the electric scooter with driver on board can only be implemented if the driver is at his command post, is prepared and only if the speed of the electric scooter is greater than 0 km/h, being started mechanically by pushing the scooter forward and applying the electric throttle only afterwards.
.1 General Instructions
— Joyor electric scooter is a personal transportation vehicle and is designed for one person only. Please do not transport a passenger on this electric scooter.
— Joyor electric scooter is designed for adults only. People under the age of 16 cannot use this vehicle. Children should not use the vehicle or play with it.
— Please wear a safety helmet when riding the electric scooter.
— The vehicle cannot be used in unauthorised spaces and the user has to comply with the current local norms and regulations of the circulation of the personal mobility vehicles
— Do not ride the electric scooter on the unsafe surface.
— Please practice on an open traffic-free space on gear level 1 before riding on the bicycle lane.
— Please during the riding operations always keep both hands on the handlebar and both feet on the standing board. Please do not jump on the standing board.
— Do not turn off the motor power while riding the scooter.
— Do not try to ride over a gap of more than 3cm. This may cause injury to the rider or damage the vehicle.
— When riding on the rough or bumpy road, please slow down the electric scooter or stop riding the vehicle.
— A user must adjust the height of the handlebar tube according to their height to ensure a safe, stable and comfortable ride.
— Do not ride Joyor electric scooter on slippery surfaces such as oil or ice.
— Do not use Joyor electric scooter in the weather conditions with the temperature below.5.
— Do not leave the product immersed in a water depth of more than 3 cm to avoid damage to the electrical parts of the vehicle. Do not store the vehicle in a place with high humidity levels.
— Avoid riding the Joyor electric scooter in adverse weather conditions like rain, snow or wind storm to prevent an accident. If riding in these conditions, never exceed the speed of 10 km/h.
— If the electric scooter is not used for a period of longer than 30 days, regularly charge it at least every 30 days. The charging port must be kept clean and dry at all times.
— When unfolding the vehicle, please press the folding system handle till it clicks and make sure that it is in place.
— When charging, always ensure that somebody is supervising the charging site. If the charger temperature increases too much, stop the charging process.
— Always only use the original charger that corresponds to your scooter’s model.
— Please keep all plastic bags of the packaging of the product away from children to avoid suffocation.
.2 Installation and Assembly
Instructions regarding installation and assembly, aimed at reducing noise and vibrations:
— Before using the equipment, tighten all the fastening screws of the screen with the accelerator and the brake lever, making sure that these components are fixed and do not move, to avoid vibrations.
— To prevent the handlebar vibrations and shaking adjust and, if necessary, loosen the screws inside the handlebar sleeves when folded.
— Before using the equipment, make sure that there are no loose cables on the rear wheel and motor part, to avoid high noise from the motor.
— Every 2 months it is recommended to check and tighten the nuts on the rear wheel of the motor, to avoid vibrations and high noise from the motor.
.2 Folding
.3 Display
— Long press the ON/OFF button to turn on the display, and short press the ON/OFF to switch between ODO, TRIP, V, A, E, TM in the multi-indicator
— Long press the ON/OFF to turn off the display
— Long press the M and ON/OFF at the same time to enter into the parameter settings mode. Short press the ON/OFF button to switch between parameters. Short press M to change the settings. Long press the M and ON/OFF at the same time to save and exit.
— Long press M to turn on the lights
Display Functions
Speed indication, power indication, error code indication, lights control, cruise control, gear level switch and gear indicator, total mileage, single mileage, real-time voltage, running time, acceleration control.
Multi-indicator Area
Total mileage “ODO”, single mileage “TRIP”, real-time voltage “V”, running time “TIME”, error code “E”. When the symbol “!” is flashing, short press ON / OFF switch button to enter into the error analysis mode. Each number of the error code corresponds to a specific problem, as follows:
— ERRO 1: Motor fault
— ERRO 2: Throttle fault
— ERRO 3: Controller fault
— ERRO 4: Brake lever power off
— ERRO 5: Undervoltage protection
— ERRO 6: Communication fault, the display unable to get the output from the controller
— ERRO 7: Communication fault, the controller unable to get the output from the display
Speed Indicator
Unit: MPH, KM/H. A speed signal comes from the motor via controller to the display. The indicated speed depends on the motor signal and the wheel diameter.
Gear Switch
Short press the MODE button to switch the gear: 1 – slow, 2 – medium, 3 – fast. The higher the gear, the faster the speed. Gear 0 means the motor is not powered.
Lights Control
Long press the MODE key to switch on/off the front and rear lights. Rear lights are also lit automatically when braking.
Cruise Control Function
When riding the scooter, keep the acceleration handle pressed with the same pressure for 5 seconds to activate the cruise control mode. Use the brake handle to deactivate the cruise control mode.
Start mode selection
For safety purposes, all Joyor models except Mbike model are set by default to non-zero start mode, which means the motor will not get started until you start to kick the scooter first so that the speed is above zero:
USB Charging Indicator
The display is equipped with a USB port for you to be able to charge your electronic devices. When the device is connected, the USB indicator is lit. In case of problem, the indicator starts to flash, and a safety mode will be automatically activated.
Parameter Settings
Long press the M and ON/OFF at the same time to enter into the parameter settings mode. Short press the ON/OFF button to switch between parameters. Short press M to change the settings. Long press the M and ON/OFF at the same time to save and exit.
— P01: rear light brightness: 1 – the darkest, 3 – the lightest;
— P02: mileage unit, 0: km; 1: mile;
— P04: sleep mode time: 0 – no sleep mode; 1-60 – sleep mode, minutes;
— P06: wheel diameter: unit – inch; precision: 0.1;
— P07: number of measuring magnets: range 1-100;
— P09: zero start, non-zero start setting: 0 – zero start; 1 – non-zero start;
— P12: starting torque: range 0-5, 0 – the weakest, 5 – strongest;
— P15: motor drive signal percentage settings: (connected to PO8 speed limit function) full speed is set to 100
— P16: cruise control function: 1 – activated, 0 – deactivated
— P17: light settings: the lights are not lit automatically when the vehicle is on, 0 – the lights are lit automatically when the vehicle is on
.1 Before Riding
Before Riding
— Choose a suitable venue for riding the electric scooter.
— Unfold the electric scooter according to the instructions.
— Adjust the height of the handlebar tube of the electric scooter according to your height.
— Press the power button to turn on the power. The speed is set by default to gear level 1.
— For safety purposes, Joyor electric scooter has a safe start design, which means the motor can start only when the speed of the electric scooter is above 0. It prevents motor start when the acceleration handle is pressed by mistake. To start the riding operations, put one foot on the standing board of the electric scooter and the other foot on the ground and kick scoot it like a classic kick scooter. When the electric scooter is in motion and its speed is above 0, smoothly use the acceleration handle to start the motor. Once the motor starts, put the other foot on the standing board of the electric scooter and continue riding.
— When riding the electric scooter, adjust the gear level from 1 to 3, use lights and horn according to the road conditions and according to the situation.
— Be aware of the cruise control function. Cruise control function is activated when the acceleration handle is pressed with the same pressure for 3 seconds.
— Be aware of the possibility of unpredictable sudden obstacles on your way and control the speed level.
— Use the rear brakes handle for braking under normal circumstances. Use front brake handle (for models series Y and M) for braking in emergency situations.
— The greater pressure you put, the greater braking force will be applied. Be aware that hard braking may result in an accident due to slipping of the wheels, lost of balance and fall of the electric scooter. Hard braking might also cause damage to the tyre.
.2 Riding
— Press the power button to turn on the power. The speed is set by default to gear level 1.
— For safety purposes, Joyor electric scooter has a safe start design, which means the motor can start only when the speed of the electric scooter is above 0. It prevents motor start when the acceleration handle is pressed by mistake. To start the riding operations, put one foot on the standing board of the electric scooter and the other foot on the ground and kick scoot it like a classic kick scooter. When the electric scooter is in motion and its speed is above 0, smoothly use the acceleration handle to start the motor. Once the motor starts, put the other foot on the standing board of the electric scooter and continue riding.
— When riding the electric scooter, adjust the gear level from 1 to 3, use lights and horn according to the road conditions and according to the situation.
— Be aware of the cruise control function. Cruise control function is activated when the acceleration handle is pressed with the same pressure for 3 seconds.
— Be aware of the possibility of unpredictable sudden obstacles on your way and control the speed level.
.3 Braking
— Use the rear brakes handle for braking under normal circumstances. Use front brake handle (for models series Y and M) for braking in emergency situations.
— The greater pressure you put, the greater braking force will be applied. Be aware that hard braking may result in an accident due to slipping of the wheels, lost of balance and fall of the electric scooter. Hard braking might also cause damage to the tyre.
Want to Make Your Electric Scooter Go Faster? Here are a Few Speedy Tips!
Have you ever wondered why many use the electric scooter as a fun way of moving around from one place to another? There are plenty of reasons that make this mode of traveling a favorite of many.
First, unlike the regular motorcycle or car, you don’t have to acquire a driving license to operate it. Yay! You just need a helmet or some other protective wear, and Voila! You are good to go! Yes, if you want an economical ride that’s fun and relatively simple, get an electric scooter, and off you go! over, if you employ the right tips, you can make your electric scooter go really fast.
But the question is: How fast can electric scooters actually go? And is there anything you can do to increase the speed of your electric scooter? That’s precisely what we’d like to find out. Let’s jump right in!
The Simple Tips to Increase Your Electric Scooter’s Speed
If you want to increase your electric scooter’s speed, here’s what to do:
First, Remove the Scooter’s Speed Limiter
Remarkably, your electric scooter is capable of reaching a much higher top speed than you can imagine; it’s just that you’re probably unaware! Why is this the case? Simple: An electric scooter comes with an inbuilt embedded (and hidden) speed limiter. Many find this intriguing; why should the gadget be so discreetly fixed into the system? What’s its function? Why is it there?
Well, it’s good to know; the electric scooter’s manufacturer fixed this speed limiter because most countries have made laws prohibiting these machines from reaching a higher limit. This means that the speed limiter exists to prevent the machine from going to the limit. Hence, if you want to run the full speed, the solution is also simple; remove the in-built speed limiter.
Keep in mind that each scooter is essentially different. You, therefore, need to use different methods to achieve this. Overall, if your scooter uses a DC type of driving motor, just locate the sensor on the driving wheel’s transmission system. This small device shows how fast the driving wheel is rotating; it then signals the processor to limit the scooter from reaching the maximum speed.
You need to understand how the speed restriction system works. First, your scooter has sensors that control the cumulative speed of the pedals and drive. The speed limiters are generally regulated by in-built motor computer and electronic sensors. The signals are subsequently sent to the computer, limiting the motor’s output and keeping the machine traveling at a lower speed.
In short, we must confuse the computer to sense that we are traveling at a lower speed while we’re actually traveling at a higher speed. How do you do that? Put an electronic device between the sensor and the computer. Alternatively, alter the magnet in the sensor. This prevents the sensor from reading the actual speed; yes, it generates a false reading. Thus, when you are traveling at a higher speed, the sensor reads that you’re moving at a lower speed. In this way, the speed restriction is stopped, and your scooter will travel at maximum speed. This is how you can make your electric scooter move faster.
You’re at great risk of getting hurt when you remove your scooter’s speed limiter. over, the machine’s battery will drain faster. Generally, if your scooter is designed with a DC brushless motor, it typically achieves its speed limit through the oscillator. To remove it, you must get deep into the software.
Modify the Firmware
There are scooters whose original firmware has been modified by other users. Download the modified version-this will increase the scooter’s speed. When the motor’s constant power is increased, it usually gets more torque and higher speed.
Be cautious – if you live in a hot area, you should carefully monitor your scooter’s temperature using an app. Once you increase the constant power of the motor, the scooter’s temperature will increase. This can present a problem during summer, particularly if you push the scooter to its limits on steeper slopes.
Upgrade the Existing Battery
It is the battery as well as the motor power which determine how fast the scooter will go. These batteries are usually available in 24-48 volts. The voltage differs from one model to another. Nevertheless, the 24-volt battery is commonly used in most units. You only need to replace the current battery with a better version. Indeed, if you want a stronger charge that will help you push the vehicle to the maximum speed, you should ensure you have a powerful battery.
You must be cautious, however. This is a complicated process that could make or break your scooter in case something goes wrong. Why? Once the battery is replaced, you may not know whether the scooter’s speed will actually increase or if the machine will simply get burnt. If you replace a 24-volt battery with a 48-volt, you may cause the controller to overload. This might end up burning your prized scooter! Instead of increasing its speed, you’ll ultimately destroy the machine!
What’s the solution? Just connect the battery to the motor and remove the controller. Alternatively, re-program your device to feed the engine with a larger voltage. Again, be careful. Unless you employ some technical skills, you can lose your scooter while trying to make it faster.
Add Another Battery
Have you noticed that your scooter often moves faster at the start of the ride than during the ride itself? This happens when the machine’s battery is depleted. It is a normal process.
The solution to this is simple: Just add an extra battery, and you’ll maintain a higher scooter speed for a long time. Certain scooter models even come with a slot for an extra battery.
If this is the case, you merely need to connect the two batteries to have the machine powered with immense capacity. Compared to the previous option, this is much safer. Rather than messing up with the battery, you’ll be powering the vehicle by adding another energy source.
Note that there are a few disadvantages. For one, the scooter could become heavier and less moveable when you try to carry it. It will also take longer to reach a full charge.
Add Two Batteries
You can have your scooter running faster and covering longer distances without a recharge by adding two more batteries to the existing battery. But this will be trickier to achieve. Yes, it will be more difficult to connect the three batteries together. The scooter will also become heavier, and the suspension area will be overworked. Think twice before taking this option.
Change the Sprockets
If you want to achieve more miles per hour, try this: Alter the sprocket’s size. How? Change the front sprockets to become longer and the shorter sprockets at the rear. This simple trick will increase the machine’s speed. over, since you can buy the sprockets cheaply, you’ll do this without spending much. You, however, need some technical knowledge to do this without calling for assistance.
Rewind the Motor
Rewinding the motor can be beneficial whenever the motor overheats. When there’s overheating, the coils usually become shorter. For better torque, you have to increase the windings. Once the motor coil windings are reduced, it also reduces the torque and turns it to a higher RPM. Since this method is highly effective in increasing electric scooter speeds, many riders usually use it.
Be careful! The procedure for doing this is a bit complicated. You might therefore need to hire a technician. Unless you do so, you can make a costly mistake by triggering series of shortcuts that endanger your scooter. Yes, spend a little money to hire a professional-in the end, this will save your machine!
How Fast Can an Electric Scooter for Adults Speed?
Electric scooters made for adults usually go at a speed limit of 20 mph or 32 km/h top speed. This is the limit when traveling on a bike lane. Nevertheless, some modern scooters can hit 30 mph (the maximum speed for a chair-less electric scooter). To do the 30 mph, you must buy a bike that resembles the gas-powered scooter. These come with a seat and a frame to rest the feet.
How Much Can Electric Scooter for Children Speed?
For children’s electric scooters, the average is 15 mph or 24 km/h. The highest speed while traveling on a single charge is 18 mph or 28 km/h. To reduce accidents, electric scooters’ manufacturers have greatly limited the speed of children’s bikes. Also, most US states have laws that prohibit such bikes from moving at higher speeds.
Is a 15 Mph (Speed) Too Fast for an Electric Scooter?
It’s easy for an adult to control an electric scooter traveling at 15 mph. Even older teens- between 16 to 19 years-can usually do so. However, note that tens generally love to ride faster- simply for enjoyment. It’s, therefore, essential for parents to be careful when choosing a bike for the kids.
How to Determine the Electric Scooter’s Speed by Battery and Motor Power
Since electric scooters are classified as plug-in vehicles, they have their electric power stored on a rechargeable battery. This powers the motor which, in turn, speeds up the scooter. These components determine the overall electric speed.
Here are the recommended electric scooter motor power parameters:
- For 6-9-year-old kids- 90 to 120 watts: The average is 6 mph, and the maximum is 5 to 7.5 mph.
- 10-12 years- 250 watts: The average speed is 10 mph, and the maximum is 15 mph.
- 13 to 14 years- 250-350 watts: The average speed is 15 mph, and the maximum is 18 mph.
- 15 to 16 years-350 to 500 watts: This is also ideal for under 90 kg adults. The average is 18 mph, and the maximum is 20 mph.
- Adults- 500 watts and above: The average is 20-25 mph, and the maximum is 28-30 mph.
Here are the General Factors that Determine How Fast Your Bike Will Speed:
The Rider’s Weight
The scooter’s motor and battery generally work harder to fire the machine to maximum speed if the rider is heavy. Check the recommended weight limit when buying.
Tire Pressure
Check the tire pressure, especially if your scooter has pneumatic tires. This is because tires that are too soft will obviously impact the scooter’s range and speed. Such tires will also fail to absorb shock when traveling on rougher terrain.
Battery Capacity
Larger capacity batteries generally store more charge. They, thus, come with extended range capability.
Type of Terrain
The best setting for electric scooters is usually on urban roads. This is because the roads typically have smooth surfaces. over, if there are hills, they’re usually less steep. But think about the rural dirt road. The scooter will travel more slowly there because the tires sink to the ground. Of course, the bumps and lumps will similarly affect the machine’s speed.
Enjoy the Benefits of Faster Electric Scooters
There are benefits to using an electric scooter. Compared to the regular bike, you don’t need to park it. You can even walk with it right into the shopping mall! This is truly a lovely way to travel. over, electric scooters are some of the cheapest means of transport. The cost of maintenance is generally minimal. Ultimately, it uses one of the simplest forms of power- electricity.
Final Thoughts
It can be a most thrilling experience when you finally hit the top speed when riding your favorite electric scooter. Be careful, however. To prevent accidents, you must train yourself adequately on standard safety procedures.
For instance, try riding on streets or lanes that have fewer pedestrians and motor traffic. This will help you gain confidence when riding in the busier city streets.
Maintain a 20 mph speed limit on city streets and bike lanes. Wear a helmet and other protective gear. It keeps you safe. Yes, use the tips above to remain safe while enjoying a ride on your favorite electric scooter.