How to Turn Off Speed Limit on Segway Ninebot 2 Actionable Tips. Ninebot scooter f35

How to Turn Off Speed Limit on Segway Ninebot [2 Actionable Tips]

Segway Ninebot electric scooters are some of the few models offering the best value for each buck spent.

For most models, though, it seems like the company focuses more on the range than speed.

This has prompted most owners to have queries such as, how to turn off speed limit on segway ninebot electric scooters.

Turning off the speed limiter on most of the Ninebot electric scooters is very simple and mostly doesn’t require you to cut any wires.

Of course, the scooter speed limiter removal varies from one model to another and so, we are going to talk about several models in this article.

UPDATE : This year’s Scooter Christmas deals are ready. We have an entire page we update regularly with such deals. Check here to save up to 500.

Segway Ninebot Speed Limiter Removal

Switch to the fastest mode

Most of the newest Segway Ninebot electric scooters come with 4 riding modes.

The ECO mode also referred to as the Economic Mode is the slowest and is perfect for newbie riders or those looking forward to getting the most range before the battery dies.

The maximum speed while riding at this mode is 10km/h (6 miles per hour).

Standard mode (D) is ideal for those riders looking forward to enjoying both worlds of moderate speed and range.

Riding in this mode will get you to a maximum of 12 mph (20km/h).

There is also Pedestrian mode which is engaged via the mobile application of Segway Ninebot.

You can turn it on when you want to stay at a top speed of 6km/h and turn it off when you want to go faster or slower from the said APP.

Lastly, there is the Sport mode (S).

This riding speed mode is perfect for those who want to hit more speed, without worrying much about the range.

It’s ideal for experienced riders only.

To turn off any speed limitations on your Segway Ninebot electric scooter, switch to the Sport (S) mode and you will ride at unlocked speeds of 15.5 mph (25km/h).

To switch to the Sport Mode, make sure that you have installed the APP on your phone.

After that, switch on your Segway Ninebot electric scooter and connect the scooter to the APP.

On that Application, click on the Gear Icon (on your right) and then tap the ‘Speed Settings’ prompt.

At this point, ensure that the slider is at its max.

Go back to your Ninebot Segway electric scooter and double-click the power button until you see the speed settings in the display.

When you don’t see any “S”, know that you are in the slowest mode.

When the “S” color is white, then you are in moderate speed mode.

If the “S” is red, then you are in Sport Mode.

At that point, the speed limit has been turned off.

To turn to a slower speed mode, then double-click the power button again and settle at the speed mode of your choice.

Hack the scooter with an APP (risky)

If you would like to ride your Segway Ninebot electric scooter to go faster than the unlocked speed (using the Sport Mode), then you can use an App to make it faster.

However, this is a risky move and will definitely make you void your warranty.

This hack is ideal for the Segway Ninebot Max G30 e-scooter and it involves a series of processes.

  • Download the XiaoFlasher App from Google Play Store (ideal for Android devices only)
  • Download the G30DRAGSTER.zip file but don’t unzip it just yet
  • Turn on your Segway Ninebot scooter
  • Open the XiaoFlasher App on your Android Device
  • Click your scooter name on the APP
  • Click “Change Region” on the APP and set it to “US 30KM/H)
  • Click “Change Region” once more and select “Custom Serial”
  • Enter the custom serial of your scooter
  • Click “Select Zip File”
  • Select the Zip File you downloaded above
  • Click “Flash Selected ZIP file”
  • Reboot your scooter and you will notice that you have successfully unlocked your Segway Ninebot Max G30 electric scooter.

For more details on this hack, watch the video below:

In Summary: How to turn off speed limit on Segway Ninebot

You can either turn off the speed limiter on a Segway Ninebot electric scooter by switching the speed settings to the fastest mode or going the risky way and flashing the scooter’s firmware to make it faster than what the fastest mode has to offer.

Segway F Series Ninebot KickScooter User Manual

Home » Segway » Segway F Series Ninebot KickScooter User Manual

Segway F Series Ninebot KickScooter

The manufacturer reserves the right to make changes to the product, release firmware updates, and update this manual at any time. Visit www.segway.com or check the Segway-Ninebot app to download the latest user materials. You must install the app, activate your KickScooter, and obtain the latest updates and safety instructions.

Dashboard Power Button

Error Notification: It indicates that the scooter has detected an error.Temperature Warning: If the temperature warning is on, it indicates that the battery temperature has reached 131°F (55°C) or is below 32°F (0°C). At this point, the vehicle cannot accelerate normally and may not be charged. Do not use until the temperature has reverted to the normal range.Bluetooth: It indicates that the scooter has been successfully connected to the mobile device.Battery Level: When the battery is at its full capacity, it will show 5 bars. The battery power is very low when the first battery bar is red. Please charge your KickScooter immediately.

Specifications

[1] Typical Range: tested while riding under full power, 165 lbs (75 kg) load, 77°F (25°C), 60% of max. speed on average on pavement. Some of the factors that affect range include speed, number of starts and stops, ambient temperature, etc.

[1] Typical Range: tested while riding under full power, 165 lbs (75 kg) load, 77°F (25°C), 60% of max. speed on average on pavement. Some of the factors that affect range include speed, number of starts and stops, ambient temperature, etc.

Certifications

This product is certified to ANSI/CAN/UL-2272 by TUV Rheinland.The battery complies with UN/DOT 38.3.The battery complies with ANSI/CAN/UL-2271.Federal Communications Commission (FCC) Compliance Statement for USAThis device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTEThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator your body.

Industry Canada (IC) Compliance Statement for CanadaThis device complies with Industry Canada license-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

The Segway Ninebot Kickscooter Max is a big, but powerful, electric scooter.

Tom’s Guide Verdict

Beefy tires and a powerful motor make the Segway Ninebot Kickscooter Max an excellent electric scooter.

Cons

Why you can trust Tom’s Guide?

Our writers and editors spend hours analyzing and reviewing products, services, and apps to help find what’s best for you. Find out more about how we test, analyze, and rate.

Size (unfolded): 45.9 x 18.6 x 47.4 in Size (folded): 45.9 x 18.6 x 21.0 in Weight: 41.2 pounds Wheel size/type: 10-inch, inflatable Range: 40 miles Battery: 42V, 2.9 A Max speed: 18.6 mph Max rider weight: 220 pounds Motor: One 350W Charging time: 6 hours

Segway pretty much launched the electric scooter market with its personal transporter, and while that device didn’t exactly take off, the company has had more success with less-futuristic devices. The Segway Ninebot Kickscooter Max doesn’t look like something out of a sci-fi movie, but what it lacks in style, it makes up for in performance. It’s one of the best electric scooters for those who want a long and comfortable ride. Check out the rest of our Segway Ninebot Kickscooter Max review to see what else we liked about this massive electric scooter.

Segway Ninebot Kickscooter Max: Design

Outside of models with full suspension, the Ninebot Kickscooter Max is one of the beefiest electric scooters around. It has nice, large 10-inch inflatable tires, a thick downtube, and a large, rubber-clad deck with a massive battery underneath. It’s a stark contrast to the svelte Unagi Model One; side by side, it’s like looking at a Miata next to a Hummer.

The one downside is that the Kickscooter Max weighs a hefty 41.2 pounds, nearly 15 pounds more than the Unagi Model One. That makes the Max a lot less portable, especially if you’re looking to carry it on a bus, subway, or up a flight of stairs.

One of the things I liked the most about the Kickscooter Max was its bell. Most electric scooters I’ve tested treat this safety feature as an afterthought, strapping on a dinky little ringer. The Kickscooter Max’s bell, though, is big and loud. And, instead of having to shift your thumb to ring it, the Kickscooter’s bell is built into the left handlebar, so all you have to do is twist your wrist.

The Kickscooter Max has a bright color LED display; while not as large as that on the Unagi, it still conveyed all the information I needed at a glance.

I also liked the bright headlight and taillight on the Max; as with the Unagi, the Max’s taillight flashes when you hit the brakes, making you more visible to cars.

It has an IPX-5 rating for water resistance, so you could ride it through a rainstorm. You’d be miserable, but the scooter would survive.

Segway Ninebot Kickscooter Max: Setup and app

The Max ships with its handlebars detached, but connecting them is a simple matter of using the included Allen wrench to screw in six bolts. If you’ve ever assembled IKEA furniture, this should be no problem.

However, there is one extra step before you can take the Kickscooter Max out for a ride: You have to download the Segway-Ninebot app to your smartphone (Android and iOS), link the scooter to the app via Bluetooth, and then register the scooter with your email address. You can then use the app as a dashboard (if you want a smartphone mount, that’s 30 extra) and see additional stats, such as distance traveled and battery life remaining. Since the scooter itself has a readout, I almost never used the app.

Segway Ninebot Kickscooter Max: Performance

Cruising around my neighborhood, I was pleased with the smooth ride offered by the Kickscooter Max’s 10-inch tires. Despite the lack of shock absorbers, it took on potholes and sidewalk cracks like a champ.

Where the Unagi I rode has dual 250-watt motors, the Max has a single 350-watt motor in its rear wheel; nevertheless, the Max was able to power me up steep inclines nearly as easily as the Unagi. Segway claims the Max can handle 20-degree inclines, and I believe it. On one incline that caused other, less powerful scooters to slow down to 5-6 miles per hour or less, the Kickscooter Max was able to maintain a speed of around 9-10 mph. The Unagi, which has dual 250-watt motors, did a bit better, averaging around 14 mph.

Segway Ninebot Kickscooter Max: Verdict

While not as elegant in design as the Unagi Model One, the Segway Ninebot Kickscooter Max is still one of the best electric scooters because it delivers a lot of performance at a reasonable price. For 800 — nearly 200 less than the Unagi — the Kickscooter Max gets you around just as fast and just as smoothly, over longer distances.

Why Is My Ninebot Scooter Beeping?

If your Ninebot scooter is constantly beeping, you might be wondering why this is happening.

turn, speed, limit, segway, ninebot, actionable

Your Ninebot scooter will beep due to lack of activation or having error codes that need to be reset or problems with your board. Open the App and you will need to connect it through Bluetooth and click the little gear icon.

It’s not hard to get to the bottom of the matter if this is the reason since it will display error codes alongside the beeping.

You might notice that unless you activate your Ninebot scooter(Amazon Link) it will not stop beeping. This is quite annoying and frustrating.

Sometimes, there is no way out of this apart from activating it. Without activating it, you can as well forget riding it!

After opening the App, you will need to connect it through Bluetooth and click the little gear icon.

From here, hit “Activate” and then click “Yes.” The beeping should then make a single extra-long beep before shutting up.

However, this is not the only time your Ninebot scooter might be beeping. You might have activated your scooter and used it for some time, and then all of a sudden, start beeping.

In this case, all you need to do is know what the error codes stand and how they can be resolved.

How Do You Reset A Ninebot Scooter?

If you wish to reset your Ninebot scooter, you will first need to turn off the power and then wait for a few minutes before pressing the reset button.

This should see the power switch light up and the scooter run. It’s important to stay within the confines of weight limitation.

You also do not need to go up a very steep hill or try towing objects.

If your electric scooter fails to run, you will need to check the motor since the motor happens to be the power source.

Excessive riding and stunts may cause problems with your scooter. The battery charger may also be a case of starting problems, so if the indicator doesn’t work well.

It might be time to change the charger and try starting again.

E100: Why does my scooter not run? Check for loose connection(s) underneath the deck plate. If there are loose connection(s), reconnect them.

If there are NO loose connection(s), replace the reset button/power switch.

Why Is My Electric Scooter Not Turning On?

After using your scooter for an extended period, you might encounter some common problems which come rather unannounced.

And one of such common problems is starter issues.

If you turn on your scooter and it turns on and the lights, if it has battery power but still won’t start, you are staring at a problem with the starter or the starter switch.

It’s essential to establish the real cause and fix the problem regardless of which of the two problems you might face.

But what if your electric scooter does not turn on? Read on to identify some of the common causes of this and how you can fix them quickly.

One problem that might cause your electric scooter not to turn on is electrical problems. Mostly, such problems affect the starter or the switch.

There might be problems with the wires running to the relay or a problematic starter. If your scooter does not turn on, the first culprit should be the power source.

This means that your battery might have died or disconnected. You will want to check the battery first before you look for problems elsewhere.

Look at the terminals and see if they are firm. If they have deposits, you will need to clean them well and apply a little grease. Ensure that the grips are tight

How Do I Derestrict My Xiaomi Scooter?

It’s not too hard to derestrict your Xiaomi scooter. However, doing this will effectively void your warranty. Modifications void warranties and this is one hell of a modification.

Therefore, before you come down to the act, make sure that you have outlived your warranty, do not want it, or will not mind if it is voided.

Now, that is a threshold to beat! If you are persistent enough and won’t be stopped by these small bottlenecks.

There are two processes to undergo as you derestrict your Xiaomi scooter.

As you embark on derestricting your scooter, you first need to disable the CDI (capacitor discharge ignition) unit.

The CDI performs the role of electronically restricting the engine such that it can’t reach its full potential.

There is a wire that sends speed data of the back wheel to the CDI unit. This wire needs to be disconnected so that your scooter can operate at full throttle.

This is the pink wire on the body panel that happens to be on the right side of your Xiaomi scooter.

Follow this wire to the battery compartment and disconnect it from the CDI plug. But ensure that its end is not left bare. You can use electrical tape to cover the end.

Secondly, your scooter will need more fuel to handle the additional throttle capabilities after removing the wire. And this is what the second part of the derestriction is all about.

fuel needs to go to the engine; you need to have a way of making this happen. Therefore, you will need to raise a needle to enhance more fuel flowing into the carburetor.

How Do You Change Mode On Ninebot?

There are three riding modes in your Ninebot. To switch among the three modes, you need to press the start button swiftly as you ride.

When you do this, the Ninebot will automatically enter the selected mode. But, anytime you start your Kickscooter, it will always enter into turbo mode.

turn, speed, limit, segway, ninebot, actionable

You will quickly identify this mode since the indicator light is constantly on, accompanied by a beep sound in it.

When you press the start button, this light will blink slowly, accompanied by a short beep sound. If you press the start button once more, you will be taken to cruise mode.

But if you press the start button again, you will have switched to safe mode. Consequently, the indicator light will blink fast, accompanied by a shorter beep sound.

Ninebot engineered the purpose of the modes because of children’s safety. As you know, children are more susceptible to injuries when riding a Ninebot.

To address this, Segway-Ninebot originated the new cruise mode. After you turn on the cruise mode, your other foot on the ground should be used to commence movement.

The sensor will effortlessly detect the accelerated movement and establish the maximum speed.

When the speed gets above 3km/h, your Ninebot will automatically turn on the cruise mode and automatically maintain this speed rather than slowing down like in normal circumstances.

The rider can continue to accelerate with the foot on the ground when riding within the maximum speed of 14km/h.

A harder kick can achieve greater acceleration. But if you wish to turn off this mode (cruise mode), you only need to pinch the brake lever. This will automatically turn off this mode.

On the other hand, turbo mode is not hard. With your speed at 3km/h or above, press the finger shifter accelerator and keep speeding up to a maximum speed of 14km/h.

Additionally, the safe mode thrives on the same principle used by the turbo mode.

Also known as the beginner mode, this mode limits the scooter to 10km/h. This is an ideal speed for all kids.

Why Is My Gotrax Electric Scooter Beeping?

There are several reasons behind any hoverboard beeping. For instance, you might have particular causes of beeping that are specific to your Gotrax hoverboard.

It’s advisable to check out the known troubleshooting tips or check if there are any indications specific to your Gotrax hoverboard model.

The first thing you want to check out is if your Gotrax electronic scooter is charged. This is because charging is one reason behind beeping, specific to Gotrax electronic scooter.

Yes, like many hoverboards, your Gotrax electronic scooter has a battery indicator light that dabbles as an indicator when the scooter needs to be charged.

Additionally, beeping might also be indicative that your hoverboard has uneven pressure on its sensors.

But with other models, your hoverboard will only beep if you stand on one foot on the board.

Another instance that your Gotrax electronic scooter will beep is after reaching maximum speed.

It will also beep if it’s tipped too far backward or too far forward, or even after reaching a very steep incline.

These common issues can be stopped by placing your hoverboard on a flat surface and reducing your speed.

How Do You Remove The Speed Limiter On An Electric Bike?

While the speed limit feature is meant to guarantee safety to riders.

Some riders find this feature to be very irritating and will not give a second thought if they know how to do away with it.

Fortunately, there are ways to remove the speed limiter from your electric bike. This is not a hard-to-master life hack.

So, if you want to remove the speed limiter from your bike, this can be achieved without much hassle.

The first way to take off the speed limiter from your electric bike is by removing the limiting wire.

turn, speed, limit, segway, ninebot, actionable

Many scooters have a limiting wire installed on them, and removing this wire is easy and effective in disabling the speed limit.

Unfortunately, not all electric scooters have this wire. But if your electric scooter has it, you only need to identify it.

It’s not hard to identify this wire as it is installed as a single wire onto the controller.

Alternatively, you can use your hand to remove the speed limiter. If you have the know-how, you can modify the sensor to remove the speed limit on your bike.

Find the magnet at the back of the wheel and relocate it away from the wheel. When this is done, the sensor will detect lower frequency, allowing you to hit higher speeds.

How Do I Know If My Ninebot Scooter Is Charging?

When you plug your charger into your Ninebot after connecting the charger first to a wall mains outlet, the lights on the base should begin blinking on and off.

But as your Ninebot continues to have better levels of charge on its batteries, the lights will stay lit without blinking.

But when your Ninebot gets fully charged, all lights will remain fully lit without blinking.

turn, speed, limit, segway, ninebot, actionable

I appreciate the work and effort most electric scooter manuals front forth to make consumers aware of the best ways to charge their Ninebot scooter.

Unfortunately, such efforts are, at best, okay. But if you want to buy a Ninebot scooter and depend on it for transport.

You want to be sure of its reliability in terms of charging and charge retention.

Most of these manuals are incomplete, while others miss a step or two. Still, others will only cover the obvious basics.

To charge your scooter, let it cool down before you start the charging process. Avoid nay wet charging and only use an original charger.

The charging environment should be a dry, cool environment.

Again, you need to turn off your scooter while charging and start by plugging the charger into the power outlet first and then into the scooter’s charging port.

Your battery needs to be charged until it is fully charged but do not overcharge it.

Why Is My Pure Electric Scooter Beeping?

There are several reasons why an electric scooter will beep. Some form of beeping is specific to particular models.

While other forms of beeping are common across the board. There are several reasons why your e-scooter could be beeping.

To help us narrow down the reason, we recommend connecting the e-scooter to the relevant app for your make and model.

Due to the diversity of the reasons that might lead to your electric scooter beeping, you might need to perform a firmware update to clear the beeping.

Usually, your App may display a pop-up of the cause of the beeps if there is an error or fault with your electric scooter.

Conclusion

Your Ninebot scooter will beep due to lack of activation or having error codes that need to be reset.

Leave a Comment