E bike governor removal. Eliminate the speed limiter

How to Remove the Speed Limiter on an Electric Scooter?

Before starting the process, you should know that every scooter has its way of removing the speed limiter. In some electric scooters, you have to cut wires, while in some, you can do that using display and particular buttons.

Generally, when removing the speed limiter on the electric scooter, you will have to perform easy-to-do steps. By doing these, you will highly ensure the maximum speed of your vehicle.

7 Easy Steps to Make Electric Scooter Faster by Display:

  • Turn on the electric scooter display.
  • Press, and hold the electronic brake from the handle
  • During operation, keep the brake pressed.
  • Now, you have to press the power button, and it’ll show you P1 on display.
  • Move P1 to P3 by using a button here, called Light.
  • When you have done with this, press the “S” button to set your desired settings.
  • Congratulations, the speed limiter has been removed now. Turn on the scooter, get your hands off to the brake, and enjoy your ride.

7 Simple Steps to Manually Increase E-Scooter Speed by Removing Limiter:

  • Start with the two crosshead screws at the bottom, front of the deck, and remove with a pincer.
  • Next are the two crosshead screws at the top; remove them with a pincer.
  • Now, slide the casing open towards the front wheel.
  • Here, you will have a look at a bunch of wires. Usually, there are four wires of one color. Let’s assume you have found the four white wires; what’s next!
  • Pull out, and cut them at the base using a screwdriver.
  • Tape the wires to keep them clean of dirt, and then close the casing by sliding it back.
  • Pull the four crosshead screws back, and you have done this!

So, that’s how to increase the speed of electric scooters by removing the limiter. But still, there are lots of other factors present that can make your electric scooter faster.

How to Make Your Electric Scooter Faster?

Making Electric Scooter faster is mainly demanded by people to enjoy more fun journey on their E-rides. If you are one of them, you can also make your scooter fast by following these easy steps.

Remove Speed Limitations

Removing speed limitations by removing the speed limiter is one of the easiest and top ways. You can perform this using your electric scooter display without getting your hands dirty. Also, you can do this manually using the tool. You can check out the above section in this regard!

Keep Your Battery Charged

If your electric scooter battery is not adequately charged, you will undoubtedly face lower top speed and poor acceleration. The lower the battery level, the lower the rate will be.

bike, speed, limiter

If you have an electric scooter, you will surely experience performance differences when the battery goes downwards. It has been observed that electric scooters will show poor acceleration when the battery is 35% to 40%. On the other hand, it’s hard to reach the maximum or top speed when your scooter’s battery ranges from 20% to 40%.

So, to enjoy the maximum speed of your electric scooter, you have to make sure the battery is adequately charged and the maintenance. Otherwise, your electric scooter will not go to full speed.

Prioritize the Use of Airless Tires

Airless tires are found to be stickier with the road and ensure less friction with the ground. So, when you have less friction produced, ultimately, you will enjoy higher speeds. Besides, it has been observed that these tires also promote autonomy, enabling more chances to ride more miles.

Sprockets Change or Renovation

Sprocket renovation depends upon the age of your vehicle; if it is new, definitely renovation is not a good option to adopt. To enhance the electric scooter speed, the sprockets should produce no friction. So, you are highly advised to spray some oil after intervals to reduce the friction.

By the time, sprockets wear and generate more friction, even with other components. That’s what highly impacts the scooter speeds. You can also change them with new ones; this will create a huge difference.

Parts or Accessories Maintenance

Maintenance of electric scooter accessories is a bit of essential advice to you, by following which you can ensure maximum speed of the scooter. Even if a single part is not working correctly, try to maintain or replace it. If you don’t do this, it’ll later impact other features too.

For example, shocks and bumps highly impact the other electric scooter parts during high-speed riding.

Use an App to Make Electric Scooter Faster

An electric scooter can be a great way to get around, but sometimes you need extra speed. There are things to make your electric scooter faster, but one of the easiest is downloading a particular app.

There are a few different apps available that can help you make your electric scooter faster. One of the most popular is the “ Electric Scooter Speed Boost App ” and it’s available for Android and iOS devices.

Once you download and install the app, you must open it up and follow the instructions. After you’ve installed the app, you’ll need to restart your electric scooter. Once it’s turned back on, you should notice it going faster than before.

Technical Hacks Increase Scooter Speed Limit

These are the changes that you do not have to make in your routine. For example, the replacement of shocks and bumps, when they reach their durability or rewind of motor, etc. These are the things that can be included in uncommon changes.

It has been observed that uncommon changes highly boost the electric scooter speed. Here, the two significant distinctive changes to maximize the speed of an electric scooter have been described below.

Change Your Scooter Battery

Changing your electric scooter’s battery may be hard for you. We understand that it’s challenging to find a suitable battery that will fit in the tiny space, but doing this will highly maximize the scooter’s speed. When you change the battery, proper and higher voltages will transfer to all of the resting components that propel you to higher speeds. Keep this highly in your mind!

Before changing, or replacing your battery with a high voltage battery, make sure your scooter and its components are built for higher voltages or not. Because if you fit a powerful battery into the scooter, maybe it can damage the electrical components of the motor itself.

Rewind Your Scooter Motor

It’s a risky and complicated solution that should not be performed while you have a time warranty. Once your genuine contract has expired, you can implement this method. Rewinding an electric scooter motor will give you less torque and higher RPM, directly increasing the scooter speed.

Let’s analyze how we can remove speed limiters on different electric scooter models!

bike, speed, limiter

Best Tuning Chip for Specialized eBikes with 1.2/1.2E/1.3/1.3E motors

Speedbox 3.0 Tuning Chip for Brose Specialized eBikes

Our #1 pick for this motor comes from Speedbox. Manufactured in the Czech Republic, this chip was released in Spring 2023 and received a significant upgrades with the previous 1.0 version. Here’s some of our favourite features:

  • Accurate speed readings when riding derestricted
  • Simple activation via WALK or /-
  • Set a custom max speed (perfect if you want to preserve battery but can be tricky to set if you have the older TCU)

Want more? Speedbox have also released a premium bluetooth version, giving you the option to control everything via your smartphone. definitely worth a look here

Best Tuning Chip for Specialized eBikes with 1.1 SL motors

Our #1 pick for 1.1 SL Mahle motor comes from Levociraptor. This Gen2 version was released a couple of years ago but still works on the latest 2023 models. The tuning options for the 1.1 SL motor are limited due to the design of these eBikes, many of which are e-Road bikes. The key benefits of this chip is that it’s plug ride and is simple to install. The only downside being that it won’t give accurate speed or distance on your display or mission control, however you can use the third party BLevo app via a bluetooth integration if you need this function.

Best Tuning Chip for Specialized eBikes with 2.1/2.2/2.0 Motors

Our top pick for Specialized eBikes with either 2.1/2.2/2.0 Brose motors. The Speedbox 3 B.Tuning is the most advanced tuning chip on the market for Specialized riders.

You get all of the features we mentioned above in the 1.2/1.3 section plus all of this:

  • Set a custom max speed via the Speedbox App (great if you have the older TCU)
  • One click tuning control via the Speedbox App
  • Motor Lock
  • Invisible Tuning
  • Trip tracking diagnostics (again, great if you don’t have a display with readouts)

By opting for the B.Tuning version of this chip, you receive lifelong access to the Speedbox app. It’s completely free to use and gives riders the simplest way to control their tuning kit, customise max speed track rides.

Brose S Mag Brose S Tuning Options

As you will have read above, the Speedbox 3.0 B. Tuning really is the pick of the bunch when it comes to derestricting a Specialized ebike. You’ll be pleased to hear that the chip is also compatible with a few lesser known motor types including the S-Mag S. winner winner

How can I remove the speed limiter from my electric bike?

Several methods can be used to remove the speed limiter. Let’s look at each of them individually.

Manual method

This method involves interaction with two measurement elements, a sensor, and a magnet. The first is on the base of the frame, and the magnet is located on the rear wheel. When the speed of the e-bike is calculated, the circumference of the wheel is usually taken into account.

This is because the more significantly the wheel, the faster the vehicle travels. So you should remove the magnet from the rear wheel and attach it to the bike pedal bracket. By moving the magnetic device, you will automatically change the number of revolutions that the magnet makes.

When this manipulation is done, the controller will receive distorted information, so the speed limit will not work due to receiving data about the lower speed rate. Using this method, you will not need to perform any complicated operations. All you need is duct tape.

How can I move the controller?

To move the controller, you need to follow these steps:

STEP 1 – start the process of taking out the sensor and the magnet;

STEP 2 – attach the magnet to the pedal bracket;

STEP 3 – move the sensor and install it so that it is turned to the magnet.

Therefore, if you want to increase the e-bike’s speed, it is better to get rid of thick tires. Use the windshield

bike, speed, limiter

The electric bike’s speed also depends on the wind, which severely limits it. By installing a wind guard, you can develop up to 5 km per hour of additional speed, which is a nice bonus for those who do not like to ride slowly.

The secret is that this attachment provides some aerodynamic characteristics, including maximum performance, reduced drag, and increased speed.

Adjust your display settings

Electric bike manufacturers install speed limiters to control your speed and keep you safe on the road.

To go faster, you can simply change the settings of your limiter. This is very easy to do in the control panel.

Let’s say the wheel size of your electric bike is 26 inches. You can set it differently and specify that your wheel size is 18 inches.

The correct cycling posture is to lean your body forward. This position allows you to cut through the air and increase your cycling speed.

What happens when the speed limit on the electric bike is removed?

You will be able to ride at higher speeds. If you can ride up to 20 miles per hour at actual speed with the limiter, then without it, you can go up to 60 kilometers per hour. However, you should not ignore the rules and laws, which in most cases do not allow cyclists to travel above 25 km per hour. Otherwise, you can enjoy a fast ride only outside the city. When testing your electric bike at full speed, don’t forget to wear protective gear.

Is the decision to remove the speed limiter the right one?

Because most electric bikes are considered an alternative to more dangerous and faster motorcycles, they are subject to special conditions in terms of road safety. Nevertheless, cyclists wish to ride at higher speeds than are normally allowed.

While removing the speed limiter can usually achieve an increase in speed, it is not always the right decision.

Whether or not to remove the limiter is up to you. You may decide not to do this for several reasons:

  • Top speed can cause an accident on the road. This is why it is important to control the speed limiter and drive within the legal limits to ensure safety;
  • The speed limiter of the electric bike is manufactured according to the laws of a certain state if it is the USA or a separate state. For example, the allowed speed in the USA is 20 miles per hour. Accordingly, owners of vehicles that remove the speed limiter pay for this act with heavy fines;
  • Every electric bike is manufactured to ride at a certain speed for which components such as the battery, motor, frame, tires, and built-in bicycle options are designed. Exceeding the maximum speed can negatively affect the components of the e-bike. A top speed will put more strain on the battery and may cause the electric bike to fail quickly, resulting in a significant decrease in charge capacity and range. Excessive loading may cause the battery to overheat. This will result in a shortening of the electric bike’s service life;
  • Methods that are taken to remove the speed limiter can lead to irreparable or difficult-to-reverse consequences. Removing the speed limiter will automatically void your warranty, as no company will be willing to repair your e-bike after doing so;
  • E-bikes, which are built for riding at high speeds, feature thicker tires. Whereas conventional wheels, which are subjected to pressure at high speeds, are capable of failing much more quickly. This will lead to costly repairs and replacement parts.

Final thoughts

It is very easy to remove the electric bike’s speed limiter if you want to. To do this, there are manual and technical methods. Within the area where the cyclist resides, he is obliged to ride according to the established rules at the speed allowed by law.

Enjoy fun riding in areas where there are no strict speed limits. I wish you exciting rides, full of emotions and exciting experiences!

FAQ

How can I increase the speed of my electric bike?

The best method to increase your electric bike’s speed is to remove the controller. After this measure, your electric bike transport will have no limitations and you will be able to enjoy riding at full speed.

How do you override a speed limiter?

To remove the controller you need to use one of the methods that will be convenient for you. You can do it manually or use a special tool kit.

How do you hack the speed limit on an e-Bike?

To hack the speed limit on an electric bike you need to cut the wire on the controller. After removing it, your bike will have no speed limit.

What controls the speed of an electric bike?

The speed of the e-bike is controlled by a special speed limiter.

How to Unlock Your Velotric Ebike’s Top Speed

Did you know that the Velotric Discover 1 and Nomad 1 have the capability to ride as technically Class 3 ebikes? While both of these bikes are shipped as Class 2 ebikes, you can unlock the speed limiter, increasing the max speed to 25mph (which is shy of the max Class 3 speed of 28mph, but still above the Class 2 limitation of 20mph).

We’ll show you how to unlock your Velotric ebike below. But first, let’s quickly break down the different classes of electric bikes.

What are ebike “Classes” and what do they mean?

Electric bikes come in three Classes: Class 1, Class 2 and Class 3. Sometimes, they’re referred to with Roman numerals as Class I, Class II and Class III, but these designations mean exactly the same thing.

The three classes of ebike are typically defined as follows:

Class 1 and Class 2 ebikes are the most widely used in the U.S. as they have the fewest restrictions surrounding who can ride them and where you can ride. You can usually ride these ebikes mostly anywhere you can ride a traditional, non-powered bike.

Class 3 ebikes are faster and more powerful, and with that comes some additional restrictions, including age and where you can ride. For instance, many states don’t allow Class 3 ebikes on bike paths.

Please note that each state differs in their legislation regarding ebikes. We highly recommend that you check your state’s specific policies here.

DISCLAIMER (IMPORTANT)

Customers who unlock their Velotric ebikes to Class 3 mode are responsible for checking that they use their ebikes in compliance with their local laws. Velotric cannot take responsibility for any legal liabilities associated with using the bike in Class 3 mode. Please check here.

Follow the directions below to unlock the speed limiter and upgrade your ebike to‘Class 3 mode. If at any time you have questions or need help, please reach out to our customer service team at help@velotricbike.com. Please note to comply with the Class 3 definitions, you must unplug the throttle. We recommend pulling off the throttle from your handlebar entirely if you intend to use your Velotric ebike as a Class 3 ebike to avoid any legal complications.

Step 1: Pull Up the Speed Menu

While your bike is powered OFF, hold [Power] and [] together for 20 seconds. The display will then enter the speed menu, pictured below:

Step 2: Adjust the Top Speed

Click [] to increase the speed limit up to 40km/h, (~25 mph). You can also click [-] to decrease the top speed.

Afterward, hold the [Power] button to shut off the display. The new top speed will be saved.

Step 3: (IMPORTANT) Unplug the Thumb Throttle Cable

You MUST unplug the thumb throttle cable in order to comply with Class 3 ebike classifications. On both the Discover 1 and the Nomad 1, the thumb throttle cable’s connectors should be ORANGE. See below for a visual. We highly recommend wrapping this cable with a waterproof sleeve or tape to seal the connectors.

The Velotric Nomad 1’s throttle and its cable are on the LEFT side of the handlebar

The Velotric Discover 1’s throttle and its cable are on the RIGHT side of the handlebar

And you’re all set! Now you have a little bit more speed to play with. Stay safe and have fun!

Have any questions? Give us an email over at help@velotricbike.com and our customer service team will be happy to help.

Final thought Or Caution

Increasing your electric bike’s speed is a great option to enjoy a smooth and fast ride. As a fact, your ebikes’ speed generally depends on electric motors and battery wattage, among other things. But a breakneck pace can be dangerous. So while making the ebikes faster. ensure you are not hampering your safety. Wear protective gear and follow traffic rules not to break any.

Furthermore, the local governments have set guidelines concerning ebike speed. So you must make electric bike faster only if you comply with the relevant state or city speed limits and regulations.

Leave a Comment