Bird Rides BirdAir 590 Electric Scooter User Guide. Bird air scooter

Bird Scooter Teardown (Reveals Surprising Results)

Businesses and individuals are always looking to save money on day-to-day expenses.

So whether you’re looking to start your side hustle or want to save money on your commute, scooters are an affordable way to get around town.

These lightweight two-wheelers are perfect for people living in areas where public transportation isn’t an option.

With the Bird scooter network rapidly expanding in cities across the United States, and every day more and more people are either renting these scooters or buying them themselves, it’s essential to know how these scooters work and what makes them tick.

This bird scooter teardown reveals what goes into each of the different components on the scooter and will help you get the most out of your ride! When tearing down your pro electric scooter, you remove all the parts, from the brake to the wheels, and can use it to make another scooter or use them for whatever you wish.

What Is a Bird Scooter Teardown?

Bird is a dockless, electric, shared transportation service that provides an alternative to cars.

A pro electric scooter has several components you must maintain regularly, and you can repair or replace them based on performance issues.

Therefore, the teardown of your bird scooter is essential so you can know its parts and how to fix it when necessary.

You should check the fuse circuit for a voltage battery pack because you don’t want your battery charger port to overheat.

Test your fuses and the voltage battery pack with your multimeter before charging again to prevent overheating.

A certified mechanic should check all electric bikes and scooters before riding. Check your fuse circuit and make sure everything is running as it should.

Check to see if any wires are loose or have been cut, test your battery charger port, and do not use it until you have tested it.

Then test the voltage of your battery pack (use a voltmeter on each cell), and even try to see if any odd smells may hint at something being wrong.

How To Teardown Bird Scooter?

Follow the procedure below to tear down the Xiaomi M365 Pro bird scooter. The guide on electric scooters shows that these scooter parts are identical.

To tear down this pro electric scooter, ensure your tools are in place before proceeding.

You will require tools such as Allen keys, a cross-head screwdriver, pliers, spanners, and a sharp craft knife.

#1. Handlebar Grips Removal

The first step you should take when tearing down your bird scooter is to remove the handlebar grip. The hand grips on the scooter are easy to withdraw from the handlebars.

Grab each one firmly, then rotate each one as you pull it away from the end.

#2. Level Removal

Remove the brake cord from the lever. Next, pull the brake cable away from the scooter’s front to pass through the lever’s channel.

Once free, depress the lever to disclose the cable’s metal head, then remove it. Remove the 5mm hex bolt under the lever clamp to remove it from the handlebars.

Next, remove the sensor door’s two cross-head screws. Rotate the sensor housing 90 degrees to remove it from the handlebar. Next, lift the sensor and remove the triangle cover.

#3. Scooter Bell Removal

To release the bell’s clamp on the handlebars, unscrew the 4mm hex bolt under the front of the bell.

After removing the end cap from the bars and sliding the bell off the end, you will need to pass the brake lever sensor through the clamp.

#4. Dashboard and display removal

Lift the two plastic coverings from the stem with your nails or a plastic spudger. A good hairdryer can reheat the glue and assist in removing it.

Remove the controller’s three cross-head screws. Next, unplug the controller connectors by removing the cable tie and rubber thimble.

The brake lever is black/blue/red, the headlight is yellow/white, and the throttle is red/green/black.

Remove the controller board by carefully removing the grey cable. Next, loosen the four handlebar bolts on the upright tube to raise the line.

#5. Remove headlight

Two tiny cross-head screws hold the headlight to the scooter’s front. Removing both allows you to pop it from the front and pull the cable through the hole.

#6. Unthrottling

After removing it, you may access the throttle. First, unscrew the handlebar clamp’s 3mm hex bolt. Next, slide the unit off the handlebar by pulling the cable.

Finally, to remove the throttle base, which resides in the handlebar channel to resist rotation, you must detach the plastic handlebar caps.

#7. Stem Removal

You fasten the stem with four 3mm hex bolts inserted when you first assemble the scooter before removing the upright.

#8. Taking Apart the Upright and the Catch

Remove the brake hose’s red grommet and the second red grommet. Unlatch the folding mechanism by loosening the 5mm hex bolt. To release the upright line, pull the cables.

After removing the 2mm hex screw from the spinning safety catch, remove it from the tube. Under the grease-covered hard plastic seat is a 2.5mm hex bolt; remove it.

Lever bolts to front catch. Use an 8mm spanner to loosen the splined black spacer and 10mm to loosen the nut. Remove the front latch’s 4mm hex bolt with an 8mm spanner.

Your scooter is now decapitated.

#9. Remove Kickstand

Flip the scooter over and remove the two 4mm hex bolts from the folding kickstand.

#10. Plate Removal

Twenty-one Torx 10 bolts secure the battery cover. Hand-removal might be time-consuming, but a low-torque electric screwdriver can help.

Unfortunately, how aggressively you ride the scooter over curbs or rocks may damage the deck’s bolts.

#11. ESC Removal

The ESC has a large capacitor, so unplug carefully. Next, pull the battery’s yellow XT30 plug from the ESC. Next, use a knife to remove the silicone sealant off the charger socket cable.

Unbolt the socket’s two 2mm hex bolts and pull the loom and connector through the hole.

Remove the ESC’s three 3mm hex screws with washers and motor/control/lighting cables before pulling it out.

The deck plate serves as a heatsink, and the ESC’s backing plate has thermal paste to help.

#12. Remove battery

After removing the ESC, a connector under the rear mudguard connects the scooter battery pack to the rear brake light. Squeeze and pull the cable from below to remove the foam gasket.

To remove the battery, remove four 4mm hex bolts with washers.

#13. Front Hub removal

Feed motor cord through deck plate. Remove the left u-shaped reflector cover with a scalpel (not the sticker). The plastic cap has four 2.5mm hex bolts.

2.5mm hex bolts attach the trim to the fork. After removing the wheel nut, use an 18mm spanner.

Move the wire nut counterclockwise—the same for the other side. Next, remove the reflective cover and two 2.5mm bolts.

2.5mm hex bolts attach the trim to the fork. Using an 18mm spanner, remove the wheel nut. Dropouts release wheels. not duplicate

Six Torx 20 bolts secure the hub lid. Magnets hold a replaceable motor core.

#14. Removal of the Front Mudguard

Front mudguard kept on by 5mm hex bolt with washer beneath front fork.

#15. Headset Collar Removal

Retain the collar and washer after removing the 5mm hex bolt. Next, undo two 5mm hex bolts and lift off.

#16. Fork Removal

Remove the screws holding the cover. Pull the fork down to remove them.

#17. Remove Rear Mudguard

Remove the rubber bungs from the front mudguard first, then remove the screws holding the rear mudguard.

#18. Removal of Rear Light

After removing the mudguard, remove the rear light, be careful when removing it to avoid damaging the wire.

#19. Mudguard Hook Removal

After discarding the brake light cable, you can remove your mudguard hook.

#20. Rear Wheel Removal

Remove the brake cable’s metal end. Then loosen the bolt to release the line to remove the rear wheel.

#21. Brake Pad Release

Rear-wheel removal is required. Turn the caliper’s back cap with a 5mm Allen key. The magnet-holding piece will slide out the back, then use a flathead screwdriver to remove the other pad.

#22. Cable-brake

This cable brake runs through the down-tube, footplate, and mudguard. If changing it, use a snake to route the cable, as it’s tricky.

#23. Bumper footplates

The scooter footplate has two side parts and a spherical front piece. Each piece has two cross-head screws to remove before unclipping.

Likewise, you can remove the stand’s metal portion when it’s separated from the frame.

#24. Foothold Grip

The foothold grip is a sticker; use a hairdryer to remove it.

Bird Scooter Disassembly

Suppose you want to disassemble your bird scooter.

First, you should know that your bird scooter has a GPS up front with a scooter battery pack that helps the GPS output cell signal power.

After the controller wire, the brake wire goes to the primary circuit.

Open up the GPS to remove it and relocate it out of the way. The quickest way to accomplish this is from the bottom, but remove the rubber panels on both sides first.

You can use a Phillips head to remove these, then flip your scooter over to examine the bottom.

Remove the screws from the bottom of the scooter (there are six screws). Then you see the main circuit board. Disconnect it correctly.

Then follow the procedure to teardown the scooter. There, you have all your parts disassembled.

Conclusion

You tear down your bird scooter to make way for a new one. For example, you use the parts to build a new one or do something with it. While tearing it down, make sure you do it properly.

Bird Rides BirdAir 590 Electric Scooter User Guide

Home » Bird Rides » Bird Rides BirdAir 590 Electric Scooter User Guide

Get started.

Assembly Materials

BIRD AIR VEHICLE (FOLDED)

Riding

The dash display shows the speed mode the Bird Air is in. There are 3 different speed modes:

To switch between the three modes, double-tap the power button. Double-tapping will always cycle in the order of Takeoff, Glide, and Fly speed.

Folding

The Bird Air can be folded for convenience. Ensure the Bird Air is powered off before attempting to fold it.

  • SLIDE THE LOCKING SLEEVE UPTake hold of the locking sleeve and slide the sleeve up from the lever.
  • ROTATE THE LEVER DOWNWhile holding the locking sleeve in place atop the lever, rotate the lever down.
  • FOLD THE NECK DOWNTake hold of the neck and fold it down 90 degrees until the handlebar assembly is just above the stomp brake.
  • LOCK THE NECK INTO THE FENDERPush the neck down atop the stomp brake until the black tab at the base of the handlebar assembly meets with the stomp brake.Hold the stomp brake down, then push the neck further into the fender until the black tab locks into place.Let go of the stomp brake and neck. It is now possible to lift the scooter from the neck.

Unfolding

Reverse the folding process to unfold the Bird Air.

  • RELEASE THE TABPush down the stomp brake to free the tab at the base of the handlebar assembly.
  • SET THE NECK AND LEVERLift the neck 90 degrees to the upright position on the vehicle.Push the lever at the base of the neck up.
  • SLIDE THE LOCKING SLEEVE DOWNSlide the locking sleeve down into the lever, making sure it clicks into place. The lever must be completely locked in the upright position.

Specifications

Charger Specifications

Cleaning and Storage

  • Use a soft, wet cloth to wipe the mainframe clean. hard-to-remove dirt can be scrubbed with a toothbrush, then cleaned with a soft wet cloth.
  • Do not wash your Bird Air with alcohol, gasoline, acetone, or other corrosive solvents. These substances may damage the appearance and internal structure of your Bird Air. Do not wash your Bird Air with a power washer or hose.
  • Warning – Make sure your Bird Air is powered OFF and the charging cable is unplugged before cleaning; otherwise, you may damage the electronic components.– Storage Temperatures: 14–104°F (-10-40°C)

Battery Pack Maintenance

– Do not store or charge the battery at temperatures outside of the stated limits (see specifications).Do not puncture the battery. Refer to your local laws and regulations regarding battery recycling and/or disposal.– A well-maintained battery can perform well even after many miles of riding. Charge the battery after each ride to avoid draining the battery completely. When used at room temperature (70°F [22°C]) the battery range and performance is best.– Warning: Do not attempt to disassemble the battery. Risk of fire. No user-serviceable parts.– Warning: Do not ride when the ambient temperature is outside of the operation temperature (see specifications), because low/high temperature will limit the maximum power/torque. Doing so could cause personal injury or property damage due to slips or falls.

Questions? We’ve got answers.Visit support.bird.co for help.1 (866) 205-2442Bird Rides406 Broadway Avenue #369Santa Monica, CA 90401

Instructions Safety Guidelines

Before each use, conduct a basic safety inspection of the Bird Air, including

(i) trueness of the wheels condition of tires;(ii) safe operation of all brakes and lights;(iii) good condition of the frame;(iv) sufficient battery charge power; and(v) any sign of damage, unusual or excessive wear, or other open and obvious mechanical problem/maintenance needs.components shall be maintained and repaired in accordance with the manufacturer’s specifications and using only the manufacturer’s authorized replacement parts with installation performed by dealers or other skilled persons. Do not modify the scooter as it will void your warranty and introduce potential safety issues. Read and understand all safety warnings listed on the product label.

  • Recommended age: 16 years old.
  • Maximum weight: 220.0 lb (99.8 kg). No more than one rider should ride at a time.
  • Risk of injury or death from loss of control, collisions, and falls. Helmets and other protective equipment are highly recommended and may be required by law.
  • Be sure to read the User Manual local to your region found on support.bird.co.
  • Product warranty for your region can be found by visiting support. bird.co
  • Comply with local laws and regulations when riding this product. Do not ride where prohibited.
  • Ensure the intended area of operation is safe. Do not ride in the snow, in the rain, or on roads that are wet, muddy, icy, or that are slippery for any reason. Do not ride over obstacles. Avoid sharp bumps, drainage grates, and sudden surface changes.
  • Avoid streets and surfaces with water, sand, gravel, dirt, leaves, and other debris.
  • The scooter should not be used for racing, stunt riding, or other maneuvers.
  • Avoid contact with moving parts. Ensure hands, feet, hair, clothing, and other body parts stay clear of moving parts like the motor or front wheel.
  • ALWAYS keep both hands on the handlebar when riding.
  • You should not ride the Bird Air:
  • if under the influence of alcohol or drugs,
  • if you have a heart condition, are pregnant, have head, back, or neck ailments that limit your ability to ride safely,
  • if you have any mental or physical conditions that may make you susceptible to injury or impair your physical dexterity or mental capabilities to recognize, understand, and perform all of the safety instructions and to be able to assume the hazards inherent with the Bird Air.
  • DO NOT attempt to disassemble the battery. Risk of fire.
  • Never modify the electrical system as this may result in a risk of electric shock, electrocution, or fire.
  • DO NOT attempt to charge a vehicle while wet.
  • DO NOT ride or attempt to charge a vehicle that has been submerged in water or if there is risk of water intrusion into the battery compartment, even if the vehicle is no longer wet. Contact Bird for further instructions.
  • To prevent electric shock when cleaning, remove the charger plug from the outlet and wipe the vehicle with a dry cloth. Only use the charging cable provided by the manufacturer.
  • Only store in dry areas. Never store in wet conditions.
  • Devices are not intended for use at elevations greater than 2000 m above sea level.
  • Prolonged exposure to UV Rays, Rain, and the Elements May Damage the Enclosure Materials, Store Indoors When Not in Use.
  • Reorienting or relocating the receiving antenna.
  • Increasing the separation between the equipment and receiver.
  • Connecting the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Disclosure for Users in the State of Californiaas required by CA Vehicle Code 407.5YOUR INSURANCE POLICIES MAY NOT PROVIDE COVERAGE FOR ACCIDENTS INVOLVING THE USE OF THIS SCOOTER. TO DETERMINE IF COVERAGE IS PROVIDED, YOU SHOULD CONTACT YOUR INSURANCE COMPANY OR AGENT.YOU MAY NOT MODIFY OR ALTER THE EXHAUST SYSTEM OF THIS SCOOTER CAUSE IT TO AMPLIFY OR CREATE EXCESSIVE NOISE PER VEHICLE CODE SECTION 21226, OR TO FAIL TO MEET APPLICABLE EMISSION REQUIREMENTS PER VEHICLE CODE 27156.

Entry and Visitor Guidelines

Admission is free of charge at all locations except the Cooper Hewitt in New York City.

Most museums are open every day of the year except December 25. The Cooper Hewitt in New York is open every day except Thanksgiving and December 25.

Visit Hours and Locations for details and updates.

Passes/Tickets

These locations require passes or tickets for entry:

All other locations do not require passes or tickets for entry.

Know Before You Go

The safety and security of the Smithsonian’s visitors, volunteers, staff, and collections is of the highest importance. As the nation’s most beloved collection of museums and galleries, we work hard every day to ensure the preservation of our country’s treasures for the enjoyment of generations to come.

Please review our health and safety, security, and policy measures.

Know Before You Go

The safety and security of the Smithsonian’s visitors, volunteers, staff, and collections is of the highest importance. As the nation’s most beloved collection of museums and galleries, we work hard every day to ensure the preservation of our country’s treasures for the enjoyment of generations to come.

Please review our health and safety, security, and policy measures.

Visitor Guidelines

Health and Safety Measures

Our current health and safety measures are based on guidance from the Centers for Disease Control and Prevention (CDC) and local governments. These measures may change in response to changing CDC COVID-19 Community Levels, so we encourage visitors to regularly check our website before their visit for the latest guidelines.

We ask that all visitors follow these safety measures to protect everyone’s health. Visitors should also be aware that our museums get crowded, especially during peak visitation times. Visitors who wish to avoid crowds are encouraged to plan their visit during weekdays.

If Sick, Stay Home

We ask all visitors who are sick or feel unwell to please stay home. The Smithsonian is open 364 days a year and we look forward to welcoming you when you are healthy.

Visitors are encouraged to wash and sanitize hands frequently during their visit. Hand-sanitizing stations will be available throughout our facilities.

Masks

Masks are not currently required to visit. While not required, all visitors who feel more comfortable wearing a face mask during their visit are encouraged to do so.

Security Screening

At many of our museums, you’ll be greeted upon entry by one of our security personnel who will conduct a thorough hand-check of all bags, briefcases, purses, and containers. We encourage you to limit the number of personal belongings and bags you bring into our facilities to increase your speed through security checkpoints.

Visitors are required to walk through a metal detector at the following museums:

  • Air and Space Museum and its Udvar-Hazy Center (DC and VA)
  • African American History and Culture Museum
  • American Art Museum
  • American History Museum
  • Natural History Museum
  • Portrait Gallery
  • Postal Museum
  • American Indian Museums (DC and NY)

Those who are unable to go through the metal detector will be hand-screened with an electronic wand by security personnel. Bag checks will be conducted by hand or via an X-ray machine.

We ask for your patience, cooperation, and assistance in keeping America’s treasures safe.

Visitors should not leave personal belongings unattended, nor leave them stored at one museum while visiting other sites.

Prohibited Items

The following items are prohibited at all museums:

  • Sharp items such as knives (including or Swiss Army style knives), screwdrivers, scissors
  • Firearms
  • Pepper spray and Mace.

See Prohibited Conduct for additional information.

Lockers/Storage

We encourage you to limit the number of personal belongings and bags you bring into our facilities as they will be subject to a thorough search. Limiting the items you bring will increase your speed through security checkpoints.

The following museums currently offer visitor lockers/storage:

  • African American History and Culture Museum
  • American History Museum
  • Asian Art Museum (Freer and Sackler)
  • Hirshhorn Museum
  • Natural History Museum
  • Postal Museum
  • Udvar-Hazy Center (VA)

Visitors should not leave personal belongings unattended, nor leave them stored at one museum while visiting other sites.

Service Animals

Service animals are welcome in the museums and the National Zoo. Under the Americans with Disabilities Act (ADA), a service animal is defined as a dog that has been individually trained to do work or perform tasks for an individual with a disability. Pets are not permitted.

Medical Supplies, Devices, and Equipment

The Smithsonian welcomes guests to bring any medical supplies, devices, or equipment they might need during their visit. Visitors should note that public storage space is not available at all locations. Visitors who bring medically necessary items/equipment should plan to maintain possession of them throughout their visit.

All Smithsonian locations permit the use of manual and motorized mobility devices (e.g., scooters, walkers, wheelchairs) and have at least one entrance accessible to visitors using mobility aids. Visitors who bring a mobility aide or device with them should plan to maintain possession of the item throughout their visit. Devices used strictly for recreational purposes are prohibited.

Photography Policy

The Smithsonian permits still and video photography for noncommercial use only in its museums and exhibitions, unless otherwise posted.

For the safety of our visitors and collections, the Smithsonian prohibits the use of tripods, monopods, selfie sticks or similar devices in our museums and gardens. This is a preventive measure to protect visitors and objects, especially during crowded conditions. We encourage museum visitors to take selfies and share their experiences—and leave the selfie sticks in their bags.

Working members of the media who need to use a tripod or monopod must obtain permission from the museum’s Public Affairs Office and must be escorted by a museum staff member while in the building or garden.

Smoking Policy

Smoking is prohibited in all Smithsonian facilities. This includes e-cigarettes.

Prohibited Conduct

Visitation policies at the Smithsonian Institution are designed to protect visitors and staff as well as secure and preserve the collections, facilities, and historic buildings entrusted to the Smithsonian’s care.

While on Smithsonian premises NO VISITOR SHALL:

  • Carry firearms, other dangerous or deadly weapons, or explosives, either openly or concealed on the premises. The prohibition on firearms applies to all visitors, including those with firearm permits, but not to active law enforcement personnel authorized to carry firearms.
  • Display or carry placards, signs, or banners
  • Destroy, damage, or remove property
  • Climb upon any part of a building
  • Use loud, abusive, or otherwise improper language
  • Loiter, sleep, or participate in unwarranted assemblies
  • Create any hazard to persons or things
  • Perform obscene or indecent acts
  • Engage in disorderly conduct
  • Use, possess, or sell illegal drugs
  • Smoke, this includes e-cigarettes
  • Bring dogs or other animals, other than service animals
  • Take photographs for advertising or any other commercial purpose
  • Solicit for commercial or charitable purposes or distribute advertisements, pamphlets, handbills, and flyers
  • Damage, deface, pick, or remove any herb, shrub, bush, tree, or turf, or portion thereof, in any Smithsonian Garden or at the National Zoo

In addition to the above, while on Zoo premises, NO VISITOR SHALL:

  • Kill, injure, or disturb any exhibit or research animal by any means except to secure personal safety
  • Pet, attempt to pet, handle, move, or remove exhibit or research animals
  • Feed exhibit or research animals, except in strict accordance with authorized signs
  • Catch, attempt to catch, trap, remove, or kill any free roaming animals inhabiting the premises
  • Go over, under, between, or otherwise cross any guardrail, fence, moat, wall, or any other safety barrier
  • Seat, stand, or hold children over any safety barrier
  • Throw or toss rocks, or any other missiles into, from, or while on premises
  • Bring strollers, baby carriages, or other conveyances, except wheel chairs, into exhibit buildings and public restrooms
  • Engage in ball games, or any athletic activity, except in places as may be officially designated for such purposes
  • Smoke or carry lighted cigarettes, cigars, or pipes into exhibit buildings, or to have a fire of any kind on the premises

Visitors who violate these rules may be subject to fine or imprisonment. The complete Smithsonian buildings and grounds regulations can be found in Title 36 of Code of Federal Regulations, parts 504 and 520 (National Zoo).

Leave a Comment